手机版
武汉集智达工业技术有限公司
产品展示
PRODUCT
联系我们

地址:武汉市东湖新技术开发区滨湖路26号佩尔中心1栋2F

邮编:437000

电话:027-87780720

传真:027-87780750-816

网址:http://www.gemotech.net

E-mail:29442999@qq.com

  产品中心您当前的位置:首页|产品中心  
  • 产品介绍
  • 产品规格

    VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel® Atom™ processor, is designed for transportation applications requiring real-time vehicle tracking. Adopting the latest low power consumption processor and integrating a WVGA LCD with a brightness of 400nits and a 4-wire resistive touch sensor, VMC 1100 does not compromise with its space to sacrifice its functional features. It provides dual CANbus, RS-232, RS-485, USB 3.0, GPIO, analog input, PWM and LAN signal. For security, VMC 1100 supports real-time vehicle tracking through GPS and SMS/GSM/GPRS. VMC 1100 can also be upgraded to a different LCD resolution and include other features such as LTE, projected capacitive touch, CANbus protocol support and backup battery.

    General

    Cooling System: FanlessEnclosure: Plastic PC + ABS with aluminum die casting heatsinkMounting: Support VESA 75, stand mountingFour SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPSPower Input: 9 ~ 36VDC input with IgnitionPower Consumption: 26WIngress Protection: Front panel IP54Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")Weight: TBD

    LCD Panel

    7-inch TFT LCD Panel with LED Backlight800 x 480 pixels (WVGA)Brightness: 400 cd/m² (typical)Contrast ratio: 600:1 (typical)

    Touch Screen Sensor

    4-wire resistant touchAnti-glare coating surfaceTransmission rate: 78 ± 3%

    CPU & Chipset

    Intel® Atom™ Dual Core E3825 1.33GHz

    Memory

    One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)
    - Default 2GB

    Expandable Storage

    1 x SATAIII SATA DOM Slot (available option 16G and 32G)

    Expansion

    1 x Half mini-PCIe socket (PCIe + USB) for WLAN option1 x mini-PCIe socket ((USB + UART) for WWAN option)1 x External module for OBD/Battery module option(UART + USB)

    I/O Interface-Front

    F1 ~ F5 functions keyLight SensorInternal Mic-in2 x Built-in 2W speakers3 x LED indicators (Power mode, Storage and WWAN status)

    I/O Interface-Lateral

    Right side
    - 1 x Micro SD card socket
    - 1 x SIM card socket
    - 1 x USB 3.0 host type A connector
    - 1 x Mic-in, Line-outLeft side
    - 1 x Power button
    - 1 x System reset button
    - Volume up/down or Brightness up/dow

    I/O Interface-Rear

    1 x 5-pin Circular connector for Power/Ignition input1 x RJ45 for LAN1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)1 x DB9 (Male) for
    - RX/TX or RS-485
    - 2 x CAN Bus 2.01 x DB15 (Female) for
    - GPS dead reckoning interface (optional)
    - 2 x PWM, 2 x Analog Input, 3 x GPO, 3 x GPI
    Analog Input requirement for Voltages are measured
    Channel: 8
    Voltage range: 0 ~ 38V
    Resolution: 8 bit
    Analog Input requirement for Frequency, Speed
    Square wave
    Frequency signal offset voltage range: 0 ~ 15VDC
    Protection: +/- 500V spike
    Frequency signal duty cycle range: 10% ~ 90%

    Communication Module

    1 x On board GPS module1 x WLAN or Bluetooth module for optional1 x WWAN module for optional

    Power Management

    Selectable boot-up & shut-down voltage for low power protectionHW design ready for 8-level delay time on/off at user's self configurationPower on/off ignition, software detectableSupport S3 and S4 suspend mode; wake on RTC and SMS

    Operating System

    Windows 8 Professional, WES8Windows 7, WES7Linux Fedora (kernel V3.2.0)

    Environment

    Operating temperatures: Ambient with air -20°C to 60°CStorage temperatures: -30°C to 80°CRelative humidity: 10% to 95% (non-condensing)Vibration (random): 3g @5 ~ 500HzVibration
    Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
    Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24Shock
    Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g
    Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g

    Power Design & Protection

    Load dump and inductive load protection

    Cold cranking protection

    Transient voltage protection

    Electrostatic discharge protection

    Standards/Certifications

    EMC
    - CE, FCC class BPower
    - SAE J1113
    - SAE J1455
    - ISO 7637-2Safety
    - EN 60950-1 LVD